The D Series is a single tower desiccant air dryer designed for point-of-use applications. The rust-free powder coated aluminum housing is made in Canada and includes built-in brackets.
DESCRIPTION
The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications. The wet compressed air enters at the inlet, is first separated due to the off-set inlet creating centrifugal separation to trap water droplets, and subsequently passes around a polypropylene coalescer element, felt pads, and stainless-steel grids to remove solid particulates. The air flows upward through a sewed filtration desiccant bag that acts as a sponge to absorb moisture. Finally, the air flows again through the second filtration stage to eliminate any desiccant dust. This 3-stage system efficiently provides separation, filtration, and drying. It is time to replace the cartridge when the Moisture Gauge indicates saturation. The replacement is fast and mess-free, thanks to the US stainless-steel clamp. The rust-free powder-coated aluminum housing is made in Canada and includes built-in brackets. A superior alternative to Devilbiss DAD 500, Camair CT30, MP Filenco, Van Air Moisture Block.
SPECS
INLET / OUTLET PORTS: 1-1/2'' NPT
AIRFLOW @ 100 PSIG: 150 SCFM
MAXIMUM INLET PRESSURE: 150 PSI
MAXIMUM INLET TEMPERATURE: 100°F (38°C)
CRN: CERTIFICATIONS & PRESSURE RATINGS
PRE-FILLED WITH DESICCANT CARTRIDGE
PRESSURE GAUGES, SAFETY VALVE, AND BALL VALVE INCL.
UNIT WEIGHT: 50 LB
BOX DIMENSIONS: 22 x 12 x 9 PDF
PDF
FAQ
1. How long does the cartridge last?Typically we recommend changing the cartridge at least once to twice every year (or every 2,000 hrs) when used for point-of-use applications with an intermittent flow.2. When do I know when to change the cartridge?Use our moisture indicator HGT-1/4 and replace the cartridge when the R.H. exceeds 80%.3. Can I regenerate the desiccant?We highly recommend replacing the desiccant with a fresh cartridge for optimal performance. However, you may dry the desiccant by emptying the bag and leaving the activated alumina in an oven at 275 F for 4 hours (approximately). Let the desiccant cool down before refilling the bag. Use a commercial stapler to close the bag.
4. How can I extend the life of the cartridge?We recommend draining the tower daily by opening the ball valve or using our automatic timer drain TD-1/4. When there are bulk liquids in the compressed air, a water separator FSD Series installed upstream of the dryer will knock water and prevent the flooding of the cartridge.
5. Can I oversize my air dryer?Yes, oversizing the air dryer will increase the time in between maintenance.
Nano Purification Solutions
Nano Purification NDL 010 GF: High Efficiency Desiccant Air Dryers
Description PRODUCT DETAILS **A general rule for compressor output is 3-5 SCFM per HP. Check in your compressor manual, or with the manufacturer** The
D2 COMPRESSED AIR DRYER - 7 SCFM - 1/2 CONNECTIONS
D2 - Desiccant Compressed Air Dryer
DESICCANT AIR DRYER -40⁰ DEW POINT 24 SCFM
24CFM D1 Heatless Modular Desiccant Air Dryer With Integrated After Filter By Nano - Warthog Air Compressor Store
Desiccant Air Dryer - D Series
40° F* 150 CFM with 1.5 NPT, designed for point-of-use applications
Super-Dry D2, 280-120, 150 SCFM Heatless Desiccant Air Dryer
Super-Dry D2 - Desiccant Air Dryer - up to 150 CFM — Compressed Air Advisors Online, Inc.
Van Air Systems 80-1498 D2 Compressed Air Dryer, Includes 1 m F200 Series After-Filter and 1 18 lb Pails of Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor, 7 CFM, 1/2
QHD Heatless Desiccant Dryer - Air Production Service
Desiccant Air Dryer Toronto or Guelph - Compressed Air International
D4 Compressed Air Dryer Industrial Minerals (NZ) Ltd
45 CFM Desiccant Air Dryer